Trident® Surgical P2 | Level 3 Face Masks | No.1 Fit Tested Mask in an Independent Fit Study - Regular (2Boxes/40masks)

Product Name:

Trident P2 Level 3 Surgical Disposable Face Mask

Each box contains 20 individually packaged masks

Regular Standard Size.

Contains 2 boxes

Standards Achieved:

• P2 certified 
• ARTG 344154
• AS 4381: 2015 Level 3, 160 mmHg (ID No. BMP 737354)
• AS/NZS 1716: 2012 (ID No. BMP 732382)
• No.1 Fit Tested Mask in an independent fit test study

TRIDENT® Face Mask Research Paper Study

In a recently published Research Paper comparing N95/P2 face masks quantitative fit tests the TRIDENT® face masks achieved outstanding results. Professor Daryl White and his colleagues at Melbourne University recruited 500 participants for their comprehensive study. Their finding were consistent with previous research showing very high QNFT pass rates with three-panel flat-fold face masks. Their tests overwhelmingly showed the TRIDENT ® face masks outperformed their 3M competitor “both the overall and first-attempt QNFT pass rates of the Trident P2 face masks were significantly higher than the 3M Aura (99.2% vs 92.6%, p < 0.001; and 92.6% vs 76.4%, p < 0.001 respectively). The overall fit factor and the individual fit factor were also significantly higher for the TRIDENT face masks FFR than the 3M Aura.

You can access and download a full copy of the Research Paper as published in “Science Direct” using the link below:

https://www.sciencedirect.com/science/article/pii/S2468045121000961

How To Apply - Donning:

1. Position the face mask in the palm of your hand with the nose strip at your fingertips, ensuring both head straps are untwisted over the back of your hand.
2. Open both the top and bottom panels of the mask and make a bend in the foam nose seal. Place the lower panel under the chin and the upper panel with the foam nose seal over the nose bridge and underneath the eyes.
3. Holding the face mask with one hand, position the top untwisted head strap to the crown of the head.
4. Draw the lower untwisted head strap up and over the face to below the ears and back of the neck. DO NOT CRISS CROSS HEADSTRAPS.
5. With both hands, mold the foam nose seal at the top of the mask to the nose bridge and cheeks ensuring a secure fit and seal.
6. Perform a fit check (see fit check list below). Cover the front of the face mask with both hands. Inhale and exhale sharply.

How To Apply - Doffing:

1. The face mask may be contaminated. Touch only the head straps when removing.
2. Pull the bottom strap over the top of the head.
3. Pull the top strap over the top of the head.
4. Dispose of face mask into the appropriate waste receptacle in accordance with site infection control and prevention policies.
5. Wash and sanitize your hands thoroughly.

Fit Checklist:

NOTE: To achieve an optimum facial seal, the wearer should be clean-shaven. It is recommended the wearer be fit tested prior to use in accordance with AS/NZS 1715: 2009 and/or onsite requirements. Training on the safe use and limitations of the disposable face mask must be performed in accordance with AS/NZS 1715: 2009 section 2.4.

For bulk orders over 500 masks please contact AusMed Health.

Delivery/Delivery Charges

Freight charges will apply on web orders where applicable. The charge will depend on product size, weight and destination. Please ask for confirmation of delivery charges when placing order. AusMed Health aims to deliver all orders as quickly as possible, but as AusMed Health uses Australia Post we cannot guarantee delivery times. Please contact the customer service team for a tracking number or an approximate delivery date. Alternatively if you have an urgent delivery requirement please advise the customer service team to advise options and costs. AusMed Health provides Australia Post Standard Parcel and Express shipping. AusMed Health shall not be held responsible for any loss or damage caused by circumstances beyond it's control or any orders that have been lost or damaged during the course of its transit.

ADDITIONAL INFORMATION